Peugeot 2008: PEUGEOT Connect Nav / Settings

Audio settings

Press Settings to display the main page.

Select "Audio settings".

Then select "Ambience", "Position"; "Sound", "Voice" or "Ringtone".

Press "OK" to save the settings.

The balance/distribution (or spatialisation with the Arkamys© system) uses audio processing to adjust the sound quality according to the number of passengers in the vehicle.

Available only with the front and rear speaker configuration.

The Ambience setting (choice of 6 ambiences) and the Bass, Medium and Treble sound settings are different and independent for each audio source.

Activate or deactivate "Loudness".

The "Position” settings (All passengers, Driver and Front only) are common to all sources.

Activate or deactivate "Touch tones", "Volume linked to speed" and "Auxiliary input".

Onboard audio: Arkamys Sound Staging© optimises the sound distribution inside the passenger compartment.

Configuring profiles

Press Settings to display the main page.

Press the "OPTIONS" button to access the secondary page.

м Select "Setting of the profiles".

Select "Profile 1", "Profile 2", "Profile 3” or "Common profile".

Press this button to enter a name for the profile using the virtual keypad.

Press "OK" to confirm.

Press this button to add a photograph to the profile.

Insert a USB memory stick containing the photograph in the USB port.

Select the photograph.

Press "OK" to accept the transfer of the photograph.

Press "OK" again to save the settings.

The location for the photograph is square; the system reshapes the original photograph if in another format.

Press this button to reset the selected profile.

Resetting the selected profile activates the English language by default.

Select a "Profile" (1 or 2 or 3) to link "Audio settings" with it.

м Select "Audio settings".

Then select "Ambience", "Position"; "Sound", "Voice" or "Ringtone".

Press "OK" to save the selected profile’s settings.

Modifying system settings

Press Settings to display the main page.

Press the "OPTIONS" button to access the secondary page.

Select "Screen configuration".

Select "Animation".

Activate or deactivate: Automatic scrolling

Select "Brightness".

Move the slider to adjust the brightness of the screen and/or the instrument panel.

Press Settings to display the main page.

Press the "OPTIONS" button to access the secondary page.

Select "System settings".

Select "Units" to change the units of distance, fuel consumption and temperature.

Select "Factory settings" to restore the initial settings.

Resetting the system to "Factory settings" activates English and degrees Fahrenheit and deactivates summer time.

Select "System info" to display the versions of the various modules installed in the system.

Selecting the language

Press Settings to display the main page.

Press the "OPTIONS" button to access the secondary page.

Select "Languages" to change the language.

Setting the date

Press Settings to display the main page.

Press the "OPTIONS" button to access the secondary page.

Select "Setting the time-date".

Select "Date".

Press this button to set the date.

Press "OK" to confirm.

Select the display format for the date.

Time and date setting is only available if "GPS synchronisation" is deactivated.

Setting the time

Press Settings to display the main page.

Press the "OPTIONS" button to access the secondary page.

Select "Setting the time-date".

Select "Time".

Press this button to set the time using the virtual keypad.

Press "OK" to confirm.

Press this button to set the time zone.

Select the display format for the time (12h/24h).

Activate or deactivate summer time (+1 hour).

Activate or deactivate GPS synchronisation (UTC).

Press "OK" to confirm.

The system may not automatically manage the change between winter and summer time (depending on the country of sale).

Colour schemes

Depending on equipment/Depending on version.

As a safety measure, the procedure for changing the colour scheme is only possible when the vehicle is stationary.

Press Settings to display the main page.

Select "Color schemes".

Select a colour scheme in the list then press "OK" to confirm.

Whenever the colour scheme is changed, the system restarts, temporarily displaying a black screen.