Engines
The engine characteristics are given in the vehicle's registration document,
as well as in sales brochures.
The
maximum power corresponds to the value type-approved on a test bed, under
conditions defined in European legislation (Directive 1999/99/EC)...
Other information:
Left or right: lower or raise the lighting control stalk, beyond the
point of resistance.
If you forget to cancel
the direction indicators for more than 20 seconds, the volume of the audible
signal will increase if the speed is above 50 mph (80 km/h).
Three flashes
Press briefly upwards or downwards, without going beyond the point of
resistance; the direction indicators will flash 3 t..
The Stop & Start function puts the engine temporarily into standby - STOP
mode - during phases when the vehicle is stopped (red lights, queues, etc.). The
engine restarts automatically - START mode - as soon as the driver wishes to
move off again.
Primarily designed for urban use, the function is intended to reduce fuel
consumption and exhaust emissions as well as the noise level when stat..