Peugeot 2008: Ease of use and comfort / Mirrors
Door mirrors
As a safety measure, the
mirrors should be adjusted to reduce the "blind spots".
The objects that you see in the mirrors are in fact closer than they
appear.
Take this into account in order to correctly judge the distance of
vehicles approaching from behind.
Adjustment
- Move control A to the right or to the left to select the
corresponding mirror.
- Move control B in any of the four directions to adjust.
- Return control A to its central position.
Manual folding
The mirrors can be folded manually (parking obstruction, narrow garage, etc.).
- Turn the mirror towards the vehicle.
Electric folding
If the vehicle is so equipped, the mirrors can be folded electrically from
the inside, with the vehicle parked and the ignition on:
- Place control A in
the centre position.
- Pull control A back.
- Lock the vehicle from the outside.
Electric unfolding
- From outside: unlock the vehicle.
- From inside: with the ignition on, place control A in the central
position and then pull it rearwards.
The automatic door mirror
folding/unfolding function is configured via the Driving / Vehicle touch screen
menu.
Demisting/Defrosting
If the vehicle is so equipped,
demisting/defrosting of the heated door mirrors is performed when the heated
rear screen is switched on.
For more information on Rear screen demisting/defrosting, refer to the
corresponding section.
Interior rear view mirror
Equipped with an anti-dazzle system, which darkens the mirror glass and
reduces the nuisance to the driver caused by the sun, headlamps of other
vehicles, etc.
Manual model
Day/night position
- Pull the lever to change to the anti-dazzle "night” position.
- Push the lever to change to the normal "day" position.
Adjustment
- Set the mirror to the normal “day” position.
Automatic "electrochrome" model
This system automatically and progressively transitions between day and night
modes, using a sensor that measures the light entering from the rear of the
vehicle.
To ensure optimum
visibility during your manoeuvres, the mirror lightens automatically when
reverse gear is engaged.
When stationary, pull the control to release the steering wheel.
Adjust the height and reach to suit your driving position.
Push the control lever to lock the steering wheel...
Bench seat with fixed cushions and split folding backrests (2/3-1/3) to adapt
the boot load space.
Rear head restraints
They have two positions:
A high position, for when the seat is in use:
Pull the head restraint fully up...
Other information:
Load distribution
Distribute the load in the trailer so that the heaviest items are as
close as possible to the axle, and the nose weight approaches the maximum
permitted without exceeding it.
Air density decreases with altitude, thus reducing engine performance...
(Depending on version.)
On versions fitted with an electric gauge, the engine oil level status is
displayed on the instrument panel for a few seconds when the ignition is
switched on, after the servicing information.
The level read will only
be correct if the vehicle is on level ground and the engine has been off for
more than 30 minutes...